Mantis Pro SE – Tips & Quick FixesUpdated a month ago

Make the Most of Your Scooter and Solve Common Issues

Charge It Right Away

• Charge your scooter immediately after unboxing.

• This ensures battery health and longevity.

• Video Reference

Silicone Deck Mat

• The loose edges of the silicone deck mat are intentional for easy access.

• For a more secure fit, apply double-sided tape.

• Note: This may make battery access slightly more difficult.

• Video Reference

P-Settings

• Adjust P-Settings to your riding preference.

• ABS: Off for newer scooters, On for older ones (optional).

• Video Reference

Tire Wobble

• Minor tire wobble is normal.

• To reduce wobble:

  • Increase tire pressure to 45 PSI.

  • Add slime or tire sealant to the inner tube.

• Video Reference

Stem Wobble

• Tighten the quick-release locks at the bottom of the stem.

• If wobble persists, slightly loosen the hinge bolt, fold the stem, then retighten the quick-release lock.

• Video Reference

Rotor Scraping

• Metallic scraping from the back wheel usually comes from the rotor.

• Fix it by:

  1. Applying 3M silicone paste to the brake pads, then test.

  2. Loosening and retightening brake calipers while holding the left brake lever.

  3. Installing spacers between calipers and the base if needed.

  4. Contact #technical if the sound persists.

• Video Reference

Deck Light Flicker

• Lights may flicker when battery is low; this is normal.

• Ensure battery is fully charged.

• Video Reference

Leaking Brake Fluid

• Do not ride if brake fluid is leaking.

• Fix leaks:

  • Pull back the lever on the brake line, then tighten the screw.

  • If leaking at the caliper, replace the caliper.

  • Refill brake fluid following the video instructions.

• Video Reference

Charging & Fuse Replacement

• Remove the charging cap and plug in the cable.

• Charging light: Green → Red indicates charging.

• If light stays green, replace the fuse.

• Fuse replacement instructions: Video Reference