Mantis PRO Main Connector ReplacementUpdated a month ago

Tools You’ll Need:

• Scissors

• Allen wrench

• Pin extractor

• Zip ties
  
  

Step 1: Prepare the Scooter

• Unplug the LCD, brake sensor, and Eco/Turbo (single motor) button.

• Cut any zip ties securing the black cloth covering the wiring.

Step 2: Access the Wiring

• Remove the screws from the top deck cover and lift the deck.

• Take out the battery and move it aside to expose the main wiring.

Step 3: Remove the Old Connector

• Disconnect the main connector (4 wires: one 6-pin and three 2-pin connectors).

• Use a pin extractor to carefully remove the pins from the connector.

• Pull the old main connector out from the top of the stem.

Step 4: Install the New Connector

• Feed the new main connector from the top of the stem down into the deck.

• Insert the pins into their correct positions and reconnect the male and female connectors.

Step 5: Reassemble the Scooter

• Place the battery and wires back into the deck.

• Screw the top deck cover back in place.

• Use new zip ties to secure the black cloth covering.

• Reconnect the LCD, brake sensor, and Eco/Turbo button.