Kaabo quick tutorials (CS only)Updated a month ago

Decklight replacement tutorial (Mantis King GT).

Keywords: How to replace deck lights, MKGT, light

Instructions:

1. Remove the screws holding the top deck and remove the top deck. 2. Remove the screws holding the LED panel: 5 screws on top and 3 on the bottom need to be removed. Let the panel hang to the side. 3. Remove the hot glue holding the deck light.

4. Remove the washer that also holds the deck light. Disconnect the deck light from the step-down. 5. Get a pin tool and remove the pins from the connector and reuse the connector on the new deck light. 6. Repeat the process, but in reverse.

(See comment to show image guide)

Instruction provided by: Anthony

⚠️GTR - ERROR CODE 2 (Quick and simple motor troubleshooting)

Keywords: Error 2, GTR error, motor error fault, 02

Note: If customers encounter resistance in the motor, they usually feel a notch when manually spinning the motor by hand, while it is in the air.

Follow these steps to diagnose the issue:

Unplug the phase and hall sensors (blue, green, yellow, and the 5-6pin connector it's paired with).
Respin the motor.
If the notchy feeling disappears, 99% of the time it indicates a controller issue.

You can also send this video to the customer: https://youtu.be/GbNMM-fHBRI

Instructions provided by: Levin

⚠️Error code 30

Keywords: WKGT, MKGT, error 30, WWGT

Disclaimer: this applies to all Kaabo scooters with TFT display

The video did not address the TFT button or the step-down as concerns, and there is still the possibility of replacing another component.

Provide customers with this video: https://youtu.be/DqWgbNWyYe8

Instructions provided by: Levin

Was this article helpful?

Yes