Kaabo King & Warrior Tire Replacement GuideUpdated a month ago

Replacing your Wolf King or Wolf Warrior tires can be done at home with the right tools and a bit of patience. Follow these steps carefully to ensure a smooth and safe tire change.

Tools You’ll Need:

• Size 3 Allen wrench

• Size 21 mm open-end wrench

• Zip ties

• Tire spoons

• Soapy water

Step 1: Remove the Wheel

1. Free the clips holding the motor cable on both sides of the scooter.

2. Remove the wheel caps using the 21 mm wrench. This may require some force, as the caps hold the wheel securely.

3. Release all air from the tubeless tires by pressing the air intake valve with the Allen wrench.

Step 2: Remove the Old Tire

1. Remove the rotor to give yourself more space to access the tire beads.

2. Pop the bead all around the tire so there’s room for the tire spoon.

3. Apply soapy water along the tire edge to create a smooth surface for the tire spoon.

4. Use the tire spoon to lift and remove the old tire.

Step 3: Install the New Tire

1. Position the new tire on the rim.

2. Run zip ties through the tire and tighten them to compress the tire for easier installation.

3. Use the tire spoon to fully seat the tire onto the rim.

Finishing Up:

• Replace the rotor and secure the wheel back onto the scooter.

• Reattach the motor cable clips.

• Ensure the tire is properly sealed and inflated before riding.

For a video walkthrough, see: YouTube Tutorial