.png){kind=logo}
Altis Sigma – NFC Keys, Race Mode & Screen Reset GuideUpdated 10 days ago
What this covers
This guide explains:
- How NFC keys work on the Altis Sigma
- How to unlock Race Mode
- Where the power button is located
- How to factory reset the display
- What to do if the NFC key is not responding
1. NFC Keys & Race Mode
Your Altis Sigma comes with programmed NFC keys.
- The red NFC key is used to:
👉 Unlock Race Mode
How to use:
- Power on the bike
- Tap the red NFC key on the NFC reader
- Race Mode will be activated
2. Power Button Location
If the bike is not turning on:
👉 The power button is inside the bike, near the battery
To turn on:
- Locate the button inside the battery compartment area
- Press the button to power the bike
3. NFC Key Not Responding
If the NFC key does not turn the bike on or off:
Check:
- Ensure the bike is powered on first
- Tap the key directly on the NFC reader
- Try a different NFC key if available
If issue persists:
👉 If the key is already programmed to the bike but cannot turn the bike on or off,
this most likely indicates a faulty NFC key
➡️ A key replacement may be required
4. Factory Reset the Screen
If the display is acting abnormally:
To reset:
- Access the display settings
- Select Factory Reset
- Confirm reset
👉 This will restore default display settings
Important Notes
- Race Mode is only accessible with the red NFC key
- Always ensure the bike is powered on before using NFC
- If NFC functionality is inconsistent, test with another key before requesting support
Need more help?
If the issue persists after following this guide:
👉 Please contact support or submit a warranty request for further assistance